1 SEC Pro Adhesive

Product Details:

• Lasts: 7~8 weeks
• Drying Time: 1~2 Seconds
• Optimal Humidity: 40-60%
• Fume: Low
• Color: Black
• Viscosity: Medium/Thin
• Intermediate to Advanced Lash Technician
• Remember to shake your adhesive well for one minute before each use for optimal results
• Latex free
• Cruelty free
• Formaldehyde free
• All APE Lash products have been tested and vetted to be the highest of quality
• Our adhesives have superior bonding power therefore they should only be used by trained professionals

To Use:

• Remove pin and squeeze a drop of adhesive onto a sanitary surface 
• Clean adhesive nozzle and place cap back onto bottle
• Application temperature should be between 65 - 77 degrees fahrenheit, with a humidity range up to 60 at room temperature of up to 77 degrees fahrenheit in pouch with silica gel provided

Shelf Life & Storage:

• Up to 45 days after opening, up to 4 months unopened
• Store at room temperateure in a dry place protected from sunlight
• Keep the adhesive in original packaging or an airtight container next to the included silica absorbent bag

To Avoid Any Irritation:

• Clients must keep their eyes closed throughout the entire lash application process
• Dry clients lashes with a fan for a few minutes following  the lash application.
• Lightly mist clients eyes for one minute sweeping back and forth between both eyes using a nano mister.
• Wait until lashes are completely dry before allowing your clients to open their eyes.
• Use this product with extreme care. The adhesive should never have contact with clients skin and eyes.
• Our adhesives are for professional use only!

Tips:

• Always shake the adhesive without the cap.  Place a pin (provided in your pouch) into the adhesive nozzle or press a piece of foil or resin paper onto the nozzle and shake it vigorously side to side for one minute.  This will prevent the adhesive from moving up into the nozzle, which could lead to premature quality deterioration.
• Burp the adhesive by lightly squeezing the bottle, adding pressure to release any air bubbles allowing a perfect drop of glue. 
• After use, wipe off the glue on the nozzle and cap with a non-woven fabric or lint-free cloth, remove air from the container, and close the lid tightly.

Adhesive Disclaimer:

• There is a learning curve when using a new adhesive. Not all adhesives behave the same and definitely should not be treated the same. Therefore, a lash technician will need to learn how to work with any new adhesives they come across.
• Retention issues can arise when a lash technician uses the adhesive incorrectly. Not enough or too much adhesive can make or break the bond. With adhesives with a thinner viscosity it is best to use more adhesive or to use more adhesive with a thinner viscosity when applying Classic Lash extensions.
• A small bead should be seen at the base of the extension when applying classic lash extensions. This will provide the best retention. Temperature and humidity can cause retention issues. We recommend always using a Hygrometer in your lash room to ensure humidity levels are met. 

Important Notice:

• All of our adhesives and adhesive gel removers should only be used by trained and certified professionals. It is unsafe to use the adhesives on yourself. Adhesives should never touch or be too close to the skin. We are not responsible for misuse of adhesives. Do not use it for anything other than its intended purpose. You are solely responsible for for purchasing products from us.

• Most lash adhesives contain an ingredient called Cyanoacrylate. A chemical reaction will occur if fibers such as cotton, wool or leather come in contact with Cyanoacrylate, there is an exothermic reaction, producing heat and releasing smoke into the air. It is unsafe to use cotton wipes, tapes with cotton fibers, and Q-tips around adhesives. This may cause irritations or a possible chemical burn.